Custormized Size and Type
SHANQI
Product Description
H-Beam is an economical section and efficient section with more optimized cross-sectional area allocation and more reasonable weight-to-weight ratio. It is named because its section is the same as the English letter "H". Because all parts of the H-beam are arranged at right angles, the H-beam has the advantages of strong bending resistance, simple construction, cost saving and light weight in all directions, and has been widely used.
Product | H-BEAM | |
Size | High(H) | 100mm-900mm |
Flange width(B) | 50mm-400mm | |
Web thickness(t1) | 6mm-45mm | |
Flange thickness(t2) | 8mm-64mm | |
Length | 6-12m/pc or as your request. | |
Standard | GB706-2008; ASTM A36; ASTM A572; ASTM A992; AS/NZS3679.1; EN10025-2; JIS G3192, etc. | |
Material | SS400, Q235B,S235JR,Q345B, S355JR, A36 etc. | |
Technique | Hot rolled & Welded | |
Package | Standard seaworthy packing or as required | |
Port of Shipment | Tianjin Port, China | |
Date of Delivery | 5-15 days after received the deposit | |
H-beam classification
There are many product specifications of H-beam, and the classification methods are as follows.
(1) According to the flange width of the product, it is divided into wide flange H-beam (HW), middle flange H-beam (HM) and narrow flange H-beam (HN). The flange width B of wide flange and middle flange H-section steel is greater than or equal to the web height H. The flange width B of the narrow flange H-beam is approximately equal to one-half of the web height H.
(2) According to product use, it is divided into H-shaped steel beam, H-shaped steel column, H-shaped steel pile, and extremely thick flange H-shaped steel beam. Sometimes parallel leg channels and parallel flange T-beams are also included in the scope of H-beams. Generally, the narrow flange H-beam is used as the beam material, and the wide-flange H-beam is used as the column material.
(3) According to the production method, it is divided into welded H-beam and rolled H-beam.
(4) According to the size, it is divided into large, medium and small H-beams. Usually, products with a web height H above 700mm are called large, those with a height of 300 to 700mm are called medium, and those with a height of less than 300mm are called small. By the end of 1990, the world's largest H-beam had a web height of 1200mm and a flange width of 530mm.
Product Picture
Manufacturing Processes
About US
